Mettre, dans l'ordre indiqué, les ingrédients dans le récipient Vitamix et verrouiller le couvercle.
Démarrer le mélangeur à sa vitesse la plus basse, puis augmenter rapidement la vitesse jusqu'au maximum.
Utiliser le pilon pour pousser les ingrédients dans les lames.
En 1 minute, vous entendrez un bruit aigu de ronflement. Une fois que le beurre commence à couler librement à travers les lames, le bruit du moteur changera et deviendra bas et forçant. Arrêter l'appareil.
Ranger dans un contenant hermétique. Peut également être congelé pour une conservation plus longue.
Si vous utilisez des amandes crues, vous devrez utiliser 1/4 tasse d'huile ou de liquide pour créer une texture crémeuse.
Rated 3 out of
Sixty seconds to Almond Butter!I’ve only had my Ascent 3500i for a few days so no expert here. I took the plunge to make this after reading many reviews from broken machines to perfect almond butter. I didn’t use the oil, set the machine to 10 for 1 minute and I definitely had almond butter at the end. I thought it was slightly too stiff so added a tblspn of coconut oil and blended again for about 20 seconds to give a lovely creamy texture. Tasty too. The ONLY downside was the cleaning. I added some coconut milk, maple syrup, chocolate powder and ice and made a nice drink. After a cleaning cycle there was still almond butter under the blades. I had to get a toothbrush to get that out.
Date published: 2019-05-09
Rated 5 out of
Active Mom from
Thank you for the idea!I was reading an article on "How to choose the best almond butter" and at the bottom of that same article was a section on Homemade Almond Butter which had a link and led me to here. I decided to give it a try and was pleasantly surprised how easy it was to make and how delicious it tastes. I opted to make only half a batch in case it didn't turn out right. Therefore, I only used 2 cups of roasted almonds (I roasted myself). Initially I did not add any oil like some of the reviewers suggested. But it turned out a little dry. So, I decided to add 1 Tbsp of coconut oil instead of the 1/4 cup (or 1/8 cup since I was making half a batch) canola oil the above recipe calls for. It turned out creamy and delicious. Definitely will make again.
Date published: 2016-08-16
Rated 4 out of
Didn't need the oil- so glad I made this!I was nervous about making my own almond butter, but it's so expensive to buy. I used two cups of almonds, that I toasted for 5-7 minutes. I then followed the directions and in about a minute I had almond butter. I didn't hear the loud noise people talk about. I just stopped when the consistency looked right.
After I scooped out as much as I could, I added some frozen banana and a cup of water for a delicious smoothie and tasty clean up.
Date published: 2017-03-13
Rated 5 out of
Full Monty from
So easy and Tasty!!I'm with Rosa - no oil needed. Might relate to the model. My new 5300 never chugged, so I probably blended it longer than I needed to. Another step I took from another site was, rather than scrape every bit I could, I left what didn't come out easily with a rubber spatula, added water, and made a quart of almond milk.
Date published: 2016-06-21
Rated 3 out of
Too many ingredientsI make almond butter every week and you do not need the extra calories of canola oil. The VitaMix will make the most delicious almond butter with no oil whatsoever -- the nuts have enough oil on their own.
Date published: 2016-02-23
Rated 5 out of
Low-profile machine owners read thisThe first time I tried this, all I got was a big mess. But then I read the recipe questions section of this post, and discovered that machines such as mine require AT LEAST SIX CUPS of almonds for this to work properly. I tried it again, and it worked beautifully.
Date published: 2016-09-11
Rated 2 out of
Sound on the almondsHello, thank you for the almond butter recipe. I shall use it But!....who in their right mind would Ever use Canola oil?...it is not fit for consumption.
Date published: 2017-02-12
Rated 1 out of
LI Gal from
Making Almond Butter broke my machine!I made this recipe using my Vitamix and not only did it not come out smooth, the blade separated from the retainer nut. Luckily the folks at Vitamix were wonderful and replaced my container but I don't think I'll try it again. The customer service rep said I should soak the nuts for 4 hours before processing if I want to try it again.