常见问题 - Blending Stations
Open How do I know if my machine is about to overheat?
您可以通过关闭机器查看马达温度,按住数字为 2 的按钮 7 到 10 秒,即可读取温度。 正常操作下,显示屏上的读取温度是:正常。如果没有看到此读数,请关闭机器,直到温度恢复正常。为了让机器冷却,您也可以卸下容杯后操作机器,但要关闭隔音罩门。这样,暖空气将会流出,冷空气会进入马达区域。
Open How can I tell how much my machine is being used?
There are three different ways to measure your machine’s use. The first is a motor life timer. This displays the number of hours that the motor has been in operation. The second is a total cycle counter that shows the number of times the machine has been cycled. The third is a resettable count meter that can be used to compare the number of blends to register receipts.
从 Blending Station® Advance® 上了解该信息:
Press the Vitamix® logo once to reveal the mode message on the control panel. Press button 1, then button 6 within five seconds to continue. Once the correct code is entered, the display will indicate the motor temperature (NORM, WARM, HOT), a usage count, and a total. The “COUNT” is a machine usage total and can be reset. This can be used to keep a count of the number of drinks sold in a week, day, or even an hour. To clear, press and hold the START/STOP button for 5 seconds. The “TOTAL” keeps track of the machine usage, including production and testing, and cannot be cleared. See your Owner’s Manual for complete instructions.
Open Is the Blending Station® Advance® programmable?
Blending Station Advance 出厂时有 34 个预设程序。这些程序已针对不同的料理设备进行了优化。如果 34 个程序中有任何一个不能满足您的需求,可以使用程序员工具包创建自定义料理程序。
Open Is the T&G® 2 programmable?
The T&G 2 comes with 34 preset programs from the factory. These programs are optimized for different blending applications.
Open What Is the warranty period on the Blending Station® Advance®?
Vitamix® 向原始终端用户保证:
马达底座:
如果马达底座在售出后三十 (30) 天内出现故障,Vitamix 将免费更换马达底座。
如果马达底座在售出后三十 (30) 天后(但未超出一年)因材料或工艺出现故障,Vitamix 将承担维修马达底座的所有部件费用和人工费用。
如果电机底座在售出一年(但未超出三 (3) 年)后因材料或工艺出现故障,Vitamix 将承担维修底座所需的部件费用。
容杯、盖子和刀片组件:
容杯、盖子和刀片组件如有材料和工艺问题可保修,期限为售出后一年。
Open What Is the warranty period on the T&G® 2?
Vitamix® 向原始终端用户保证:
马达底座:
如果马达底座在售出后三十 (30) 天内出现故障,Vitamix 将免费更换马达底座。
如果马达底座在售出后三十 (30) 天后(但未超出一年)因材料或工艺出现故障,Vitamix 将承担维修马达底座的所有部件费用和人工费用。
如果电机底座在售出一年(但未超出三 (3) 年)后因材料或工艺出现故障,Vitamix 将承担维修底座所需的部件费用。
容杯、盖子和刀片组件:
容杯、盖子和刀片组件如有材料和工艺问题可保修,期限为售出后一年。